Dell PowerEdge R920 Owner's Manual page 141

Error Code Message Information
ASR0003
Message
Details
Action
BAT0002
Message
LCD Message
Details
Action
BAT0017
Message
LCD Message
Details
Action
CPU0000
Message
LCD Message
Details
Action
CPU0001
Message
LCD Message
Details
Action
CPU0005
Message
LCD Message
Details
The watchdog timer power cycled the system.
The operating system or an application failed to communicate within
the time-out period. The system was power-cycled.
Check the operating system, application, hardware, and system event
log for exception events.
The system board battery has failed.
The system board battery has failed. Check battery.
The system board battery is either missing or bad.
See Getting Help.
name > battery has failed.
The <
name > battery has failed. Check battery.
The <
name > battery is either missing, bad, or unable to charge due to
The <
thermal issues.
Check system fans. If the problem persists, see
number > has an internal error (IERR).
CPU <
number > has an internal error (IERR).
CPU <
System Event Log and Operating System Logs may indicate that the
exception is external to the processor.
Review System Event Log and Operating System Logs. If the issue
persists, see Getting Help.
number > has a thermal trip (over-temperature) event.
CPU <
number > has a thermal trip. Check CPU heat sink.
CPU <
The processor temperature increased beyond the operational range.
Review the logs for fan failures. If no fan failures are detected, check
inlet temperature (if available) and reinstall processor heat sink. If the
problem persists, see Getting
number > configuration is unsupported.
CPU <
number > configuration is unsupported. Check CPU or BIOS
CPU <
revision.
System is unable to boot or may run in a degraded state.
Getting Help.
Help.
141