Dell PowerEdge R920 Owner's Manual page 142

Error Code Message Information
Action
CPU0010
Message
Details
Action
CPU0023
Message
LCD Message
Action
CPU0204
Message
LCD Message
Details
Action
CPU0700
Message
LCD Message
Details
Action
CPU0701
Message
LCD Message
Details
Action
142
Review the technical specifications for supported processor types.
number > is throttled.
CPU <
The CPU is throttled due to thermal or power conditions.
Review system logs for power or thermal exceptions.
number > is absent.
CPU <
number > is absent. Check CPU.
CPU <
Verify processor installation. If present, re-seat the processor.
number > < name > voltage is outside of range.
CPU <
number > < name > voltage is outside of range. Re-seat CPU.
CPU <
Voltages outside the allowable range may damage electrical
components or may cause the system to shutdown.
1. Turn off the system and remove input power for one minute.
2. Ensure the processor is seated correctly.
3. Reapply input power and turn on the system.
4. If the issue persists, see
number > initialization error detected.
CPU <
number > initialization error detected. Power cycle system.
CPU <
System BIOS was unable to initialize the processor.
1. Turn off the system and remove input power for one minute.
2. Ensure the processor is seated correctly.
3. Reapply input power and turn on the system.
4. If the issue persists, see
number > protocol error detected.
CPU <
number > protocol error detected. Power cycle system.
CPU <
System event log and operating system logs may indicate that the
exception is external to the processor.
1. Check system and operating system logs for exceptions. If no
exceptions are found, continue.
Getting Help.
Getting Help.