Dell PowerEdge R920 Owner's Manual page 148

Error Code Message Information
LCD Message
Details
Action
PST0128
Message
LCD Message
Details
Action
PST0129
Message
LCD Message
Details
Action
PSU0001
Message
LCD Message
Action
PSU0002
Message
LCD Message
Details
Action
PSU0003
Message
LCD Message
Details
Action
148
number > removed from disk drive bay < bay >. Check drive.
Drive <
The controller detected that the drive was removed.
Verify drive installation. Re-seat the failed drive. If the issue persists,
see Getting Help.
No memory is detected.
No memory is detected. Inspect memory devices.
System BIOS was unable to detect memory in the system.
Re-seat the memory modules. If the issue persists, see
Memory is detected, but is not configurable.
Memory is detected, but is not configurable. Check memory devices.
System BIOS detected memory, but was unable to configure the
memory for system operation.
Compare system memory installation to supported system memory
configurations.
number > failed.
Power supply <
number > failed. Check PSU.
PSU <
Remove and reinstall the power supply. If the issue persists, see
Getting Help.
A predictive failure detected on power supply <
Predictive failure on PSU <
System performance and power redundancy may be degraded or
lost.
Remove and reinstall the power supply at the next service window. If
the issue persists, see Getting
The power input for power supply <
number > is lost. Check PSU cables.
Power input for PSU <
The power supply is installed correctly but an input source is not
connected or is not functional.
Verify the input source is attached to the power supply. Verify the
input power is within the operating requirements for the power
supply.
number >.
number >. Check PSU.
Help.
number > is lost.
Getting Help.