Table of Contents
Advertisement
j.
cooling fans (6)
k. cable management tray
l.
SAS backplane
m. internal USB key (if installed)
n. optical drive
5.
Reconnect the cables to the system board, hard-drive backplane, control panel board, and the optical drive cable
(if applicable).
NOTE: Ensure that the cables inside the system are routed along the chassis wall and secured using the
shimstock pieces.
6.
Close the system.
7.
Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
8.
Import your new or existing iDRAC7 Enterprise license. For more information, see
Guide , at dell.com/support/manuals.
iDRAC7 version 1.40.40 User's
115
Advertisement
Table of Contents
Troubleshooting
