Table of Contents
Advertisement
22
'
S
PECIFICATIONS
Temperature units
°C or °F
Operating temperature
32-113 °F (0-45 °C)
Indoor temperature
32-99 °F (0-37 °C)
measurement range
RF frequency
2.40-2.48 GHz
RF range
Up to 1300 ft (400 m) line of sight
Protocol
ZigBee – Home Automation 1.2
Battery Power
2 x AA Alkaline battery
Battery Life
18 months under normal usage
A/C power
18-30 VAC at R and C terminals
Size
4.2" (L) x 4.2" (W) x 1.1" (H)
10.7cm (L) x 10.7cm (W) x 2.9cm (H)
Weight
0.76 lb (345 g)
User'Manual'
'
Salus
OPTIMA'ZigBee'Thermostat'
Tools'
You may need the following tools to install the Optima thermostat.
• Smartphone or camera to take pictures
• Phillips or flathead screwdriver
• Small screwdriver to disconnect wires from old terminals
• Pencil
• Drill with 3/16" bit (only if you cannot mount the thermostat
using the existing holes)
Turn'off'power'to'HVAC'system'
Locate the HVAC breaker in the electrical panel and turn OFF the
circuit. In some regions, there may be a switch located near the HVAC
system.
Determine'wiring'configuration'
If the OPTIMA thermostat is being installed in a new system, refer to
Appendix A for the proper wiring configuration and skip to the Install
Mounting Plate section.
7'
'
Advertisement
Table of Contents
