Related Manuals for Salus ZigBee
Summary of Contents for Salus ZigBee
- Page 1 OPTIMA!ZigBee!Thermostat! Quick!Start!Guide Salus Controls Inc. 123 Townsend St. Level LL2 San Francisco, CA 94107 Version!1.0 For other language versions, please visit: www.salusinc.com...
-
Page 2: Let ' S&Get&Started
FCC&and&Industry&Canada& ’ .& RF Radiation Exposure statement: This equipment complies with FCC and Industry S&GET&STARTED Canada RF radiation exposure limits set forth for an uncontrolled environment. This Make sure you have the following items: equipment should be installed and operated with a minimum distance of 20 centimeters between the antenna and all persons. -
Page 3: Fcc&Statements
FCC&Statements& Turn&off&the&heating&and/or&cooling& WARNING: Changes or modifications to this unit not expressly approved by the party Turn OFF the breakers or remove the fuses to the heating and/or cooling responsible for compliance could void the user’s authority to operate the equipment. systems at the electrical panel. -
Page 4: Determine&Wiring&Configuration
Remove the old thermostat to expose • No oral or written information or advice given by Salus or a Salus-authorized the wiring terminals. representative shall modify or extend this warranty. If any term is held to be Take a picture of the wiring for future •... - Page 5 ARRANTY TIP:! Wrap! the! wire! ends! Remove the old thermostat wiring terminals Salus Controls Inc. (“Salus”) warrants that for a period of two (2) years around!a!long!stick,!such!as! (“Warranty Period”) from the date of purchase by the consumer (“Customer”), from the wall, taking care not to allow the a! pencil! to! keep! the! wires! this device, excluding batteries (“Product”), shall be free of defects in...
-
Page 6: Install&Batteries
Install&Batteries& Attach&Thermostat&To&Mounting&Plate& Insert the alkaline batteries into the back of the Attach the thermostat to the Mounting Plate thermostat. Make sure the polarity of the by aligning the connector pins and the plastic batteries is correct. After inserting the batteries, retention posts and pushing the thermostat the display will flash all the segments, followed by onto the Mounting Plate.