Table of Contents
Advertisement
18
'
Daylight Savings Time
ON – Daylight Savings Time is observed (default)
OFF – Daylight Savings Time is NOT observed
SETTINGS
Country – sets operating limits and defaults for time zone and
temperature units
US – United States values
CA – Canadian values
HVAC Type
HP – Heat Pump
O – O reverse valve (default)
B – B reverse valve
NON-HP – Electric, Gas, or Oil heat
FAN HG – Fan functionality for gas heating (default)
FAN HE – Fan functionality for electric or oil heating
Temperature Units
ºF – Use Fahrenheit units for temperature (US default)
ºC – Use Celsius/Centigrade units for temperature (CA default)
User'Manual'
Salus
OPTIMA'ZigBee'Thermostat'
Initial'Configuration'
After inserting the batteries, the display will flash all the segments,
followed by the firmware version number, then display US / CA
with a blinking US.
When configuring the thermostat, select the desired option by
pressing the + or – button or using the slider ring to cause the
desired value to blink, then pressing MODE.
Using the table below, select your country, then your type of system.
Blinking Value
US
CA
HP
NON-HP
O
B
HE
HG
After the initial configuration, the thermostat will display the Home
Screen, at which point it is ready to be attached to the Mounting Plate.
Description
United States – Configures thermostat for use in the US.
Canada – Configures thermostat for use in Canada
Heat Pump
Non Heat Pump – Gas, electric, or oil heat
Heat Pump with O reverse valve
Heat Pump with B reverse valve
Electric Heat
Gas or Oil Heat
11'
'
Advertisement
Table of Contents
