Connecting The Cabling - High End Systems ecodome User Manual

Connecting the Cabling

You will need:
• #2 Phillips-head screwdriver
• flat head screwdriver with a 3/16" blade
1
Locate the Ecodome circuit box on the Ecodome base.
2
Using a #2 Phillips-head screwdriver, loosen (but do not remove) the two
screws from the circuit box lid. Slide the circuit box lid to the side so that the
screws are positioned in the large end of the keyhole slot. Pull the circuit box
lid out and over the screws to remove the lid.
®
Ecodome User Manual
circuit box
slide
the lid
keyhole
slots
loosen the
two screws
Installing the Fixture
2
2-5