Terminator Resistors - Furuno FI-70 Operator's Manual

5. INSTALLATION AND INITIAL SETTINGS
How to fabricate the M12-05BM+05BF-0xx cable and MC connector
Drain wire
Sheath Sheath
Core
Twist
MC connector
5.2.4

Terminator resistors

Terminator resistors are required to close off the network ends, completing the
network.
The following FURUNO terminator resistors are available:
Part name
NMEA
Connector
Direct connection to the CAN bus/NMEA2000 backbone
Install terminator resistors to both ends of the CAN bus/NMEA2000 network backbone
cable.
Terminator
5-8
6 mm
Screw
How to insert cores:
1. Twist the cores.
2. Unfasten the screw with Philips head screwdriver.
3. Set the core to hole.
4. Tighten the screw.
5. Pull the wire to confirm connection.
Type
LTWMN-05AMMT-SL8001
LTWMN-05AFFT-SL8001
LTWMC-05BMMT-SL8001
LTWMC-05BFFT-SL8001
SC-30
CAN bus/NMEA2000 Backbone
Wire Signal Connection
Point
Drain SHIELD
Red NET-S
Black NET-C
White NET-H
Blue NET-L
Code No.
000-160-508-10 Mini connector, male
000-160-509-10 Mini connector, female
000-168-604-10 Micro connector, male
000-168-605-10 Micro connector, female
FI-70
Terminator
1
2
3
4
5
Remarks