Menu Overview - Furuno FI-70 Operator's Manual

1.4

Menu Overview

1. Press the Menu/Back key to display the main menu. The main menu contents
change according to the current category (See section 1.7 for more information on
categories). In the example below, the wind category is displayed.
Category specific
menu items are
displayed above
the Main menu
items.
Main menu starts
below the
category specific
menu items.
2. Press the right software key to select the next item down in the menu, or press
the left software key to select the next item up in the menu. The menu item
currently selected is highlighted in blue. In the example above, [Wind Speed] is
selected.
Note: The key indications for the software keys are blank if there are no more op-
tions in that direction of the menu. In the above example, the menu has no options
in the up direction.
3. Press the function key to open the selected menu. For the purpose of this
example, the [Wind Speed] menu is opened.
4. Press the software keys to select the item you wish to adjust, then press the
function key. The setting options pop-up window is displayed.
5. Press the left software key to select the next item above your current selection,
or increase the value for the current selection.
Press the right software key to select the next item below your current selection,
or decrease the value for the current selection.
6. Press the function key to apply the changes, then press the Menu/Back key to
close the menu.
1. OPERATION AND CONTROLS OVERVIEW
Wind Speed Wind Speed
Wind Angle Wind Angle
Disp Config Disp Config
Ent
Wind Speed
Wind Display:
Wind Damping:
Adjust(W Speed):
Max TWS Alarm
Ent
Power Boat
8
Engine Motor
Numerical Setting
pop-up options
pop-up
Scrollbar:
Indicates there
are more menu
items to be
displayed. Press
Alarms Alarms
the software keys
to move up or
down the menu.
True
0s(24.5kn)
1.0(24.5kn)
Sailboat
1-3