Graph Category - Furuno FI-70 Operator's Manual

2. DISPLAY CATEGORIES AND CATEGORY SPECIFIC MENUS
2.4

Graph Category

30min 30min
Depth Depth
4303 4303
ft ft
The graph category displays preselected sensor data in graph format. Up to two
graphs can be displayed simultaneously. The following data may be selected for
display in graph format.
• Depth
• W Temp. (Water temperature)
The menu items displayed for the Graph category are dependent on the currently
graphed items. In the above right example, the menu will display [Depth Graph] and
[A Press Graph]. To adjust the graphed interval and range, see the procedure below.
To set the graph data to be displayed, see "How to set up pages" on page 1-7.
How to adjust the graphed interval and range
The graphed interval and range may be adjusted for all graphs.
1. With the [Graph] page displayed, press the Menu/Back key.
2. Press the software keys to select the graph to adjust, then press the function
key.
3. Press the software keys to select the appropriate variable to change.
[Period]: Adjusts the graphed interval.
[Range]: Adjusts the graphed range.
4. Using the software keys, adjust the [Period] and [Range] appropriately. Press the
function key to save the adjustments.
5. Press the Menu/Back key to close the menu.
2-4
20 20 10 10
4300 4300
4400 4400
4500 4500
30min 30min 20 20
Depth Depth
4256 4256
ft ft
60min 60min
A Press A Press
1003 1003
HPa HPa
30min 30min 20 20
Depth Depth
4256 4256
ft ft
30min 30min 20 20
A Press. A Press.
1003 1003
hPa hPa
• A Temp. (Atmospheric temperature)
• A Press. (Atmospheric pressure)
10 10
Depth Graph
4300 4300
A Press Graph
4400 4400
30 30
Alarms
1000 1000
Disp Config
990 990
Ent
10 10
4300 4300
4400 4400
10 10
1000 1000
990 990