How To Share Language And Brilliance Settings Between Fi-70S - Furuno FI-70 Operator's Manual

4.2 How to Share Language and Brilliance Settings
Between FI-70s
The [Language] and [Brilliance] settings may shared within a group of FI-70s. If the
settings are adjusted for one FI-70 unit in the group, all other FI-70 units are also
adjusted, however, TZtouch2 unit settings are not adjusted.
Enter Enter Enter
Group A
There are three groupings available: A, B and C. To assign a group to a FI-70 unit, do
the following:
1. Access the [System] menu using the procedure outlined on page 4-1.
2. Press the software keys to scroll through the menu and select [Group], then press
the function key.
3. Press the software keys to select [A], [B] or [C], as appropriate, then press the
function key to apply the setting.
4. Press the Menu/Back key to close the menu.
Enter Enter
Group B
System
Key Beep:
Panel Dimmer:
Sharing:
Group:
Ent
Enter Enter E Enter Enter E Enter Enter
Group A
OFF
A
8
Slave
B
C
4. SYSTEM MENU
Enter Enter
Group B
4-3