Configure The Mode Of The Stack Ports - NETGEAR M7100 Series User Manual

Select the units.
8.
Select the Unit ID to display information for the selected unit.
•
Select All to display information for all units.
•
To refresh the screen with the latest information on the switch, click the Update button.
9.
To clear the sampling information, in the Clear Counters list, select the unit.
10.
The following table displays the nonconfigurable information.
Table 73. Stack Status
Field
Unit ID
Neighbor Unit ID
Current
Average
Min
Max
Dropped

Configure the mode of the Stack Ports

By default, the stack ports on each switch are configured for stacking. However, you can use
these ports as standard Ethernet ports. Use the Stack Port Configuration screen to configure
the mode of the stack ports and to view information about the ports.

To configure the mode of the stack ports:
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
1.
example, 169.254.100.201.
M6100, M5300, and M7100 Series Managed Switches
Description
The unit ID of the specific switch.
The neighboring unit with which data is exchanged.
The current time of heartbeat message reception.
The average time of heartbeat messages received.
Minimum time of heartbeat messages received.
Maximum time of heartbeat messages received.
Heartbeat message dropped/lost counter.
Chassis and Stacking
188