View The Power Matrix - NETGEAR M7100 Series User Manual

The following table describes the non configurable EPS Ports data that is displayed.
Table 67. EPS Ports
Field
Ports
State
Sharing Status
Device Type
EPS/RPS Port Group

View the Power Matrix


To view the power matrix:
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
1.
example, 169.254.100.201.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
2.
the switch.
Launch a web browser.
3.
Enter the IP address of the switch in the web browser address field.
4.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
Enter the user name and password.
5.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
6.
The web management interface menu displays.
Select System > Chassis > Advanced > Chassis Power Configuration.
7.
The Chassis Power Configuration screen displays.
M6100, M5300, and M7100 Series Managed Switches
Description
EPS port number counted from left to right while facing rear side of the
chassis.
EPS port state. Possible state is Not present or Operational.
EPS power sharing status.
Device type. Possible values are as follows:
• RPS4000v1
• RPS4000v2
• Unknown
Group of EPS slots connected to this port. Possible values are as
follows:
• 1,2
• 3,4
Chassis and Stacking
172