Configure Basic Stp Settings - NETGEAR M7100 Series User Manual

For two bridges to be in the same region, the force version must be
Note:
802.1s and their configuration name, digest key, and revision level
must match. For additional information about regions and their effect
on network topology, refer to the IEEE

Configure Basic STP Settings


To configure STP basic settings:
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
1.
example, 169.254.100.201.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
2.
the switch.
Launch a web browser.
3.
Enter the IP address of the switch in the web browser address field.
4.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
Enter the user name and password.
5.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
6.
The web management interface menu displays.
Select Switching > STP > Basic > STP Configuration.
7.
M6100, M5300, and M7100 Series Managed Switches
Configure Switching Information
standard.
802.1Q
229