Download A File To The Switch - NETGEAR M7100 Series User Manual

The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
6.
The web management interface menu displays.
Select Maintenance > Upload > USB File Upload.
7.
Use File Type to specify what type of file to upload:
8.
Archive. Archive (STK) code to retrieve from the operational flash:
•
Text Configuration. Configuration in text mode to retrieve the stored configuration.
•
The factory default is Archive.
Use Image Name to select one of the images from the list:
9.
Image1. Specify the code image1 to retrieve.
•
Image2. Specify the code image2 to retrieve.
•
In the File Path field, enter the path for the file to upload.
10.
You can use up to 146 characters. The default is blank.
Use USB File to give a name along with path for the file to upload.
11.
You can enter up to 32 characters. The factory default is blank.
Click the Apply button.
12.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.

Download a File to the Switch

The switch supports system file downloads from a remote system to the switch by using
either TFTP or HTTP.
M6100, M5300, and M7100 Series Managed Switches
Maintenance
722