Configure The Dhcpv6 Prefix Delegation - NETGEAR M7100 Series User Manual

If you are logged in as a user with read-only permission, the Pool
Note:
Name field displays only the existing pool names. To create a pool, you
must log in with the admin user name, which has read/write
permissions.
To create a pool, select Create, and enter a unique name that identifies the DHCPv6 server
8.
pool to be created.
The name can be up to 31 alphanumeric characters in length.
Use the Default Router Addresses field to specify the list of default router addresses for
9.
the pool.
The user can specify up to eight default router addresses in order of preference.
User the Domain Name field to specify the domain name for a DHCPv6 client in the pool.
10.
The domain name can be up to 255 alphanumeric characters in length.
To delete the selected pool on the switch, click the Delete button.
Click the Apply button.
11.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.

Configure the DHCPv6 Prefix Delegation


To configure the DHCPv6 Prefix delegation settings:
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
1.
example, 169.254.100.201.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
2.
the switch.
Launch a web browser.
3.
Enter the IP address of the switch in the web browser address field.
4.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
Enter the user name and password.
5.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
6.
The web management interface menu displays.
Select System > Services > DHCPv6 Server > DHCPv6 Prefix Delegation
7.
Configuration.
M6100, M5300, and M7100 Series Managed Switches
Configure System Information
106