NETGEAR M7100 Series User Manual page 557

M6100, M5300, and M7100 Series Managed Switches
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
2.
the switch.
Launch a web browser.
3.
Enter the IP address of the switch in the web browser address field.
4.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
Enter the user name and password.
5.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
6.
The web management interface menu displays.
Select Security > Management Security > Authentication List > Enable Authentication
7.
List.
To create a new enable list, enter the name in the List Name field.
8.
It can be up to 15 alphanumeric characters long and is not case-sensitive.
In the numbered lists (1, 2, 3, 4, 5, 6) select the method to appear first in the selected
9.
authentication enable list.
The options are as follows:
Enable. The privileged EXEC password is used for authentication.
-
Line. The line password is used for authentication.
-
None. The user cannot be authenticated.
-
RADIUS. The user's name and password are authenticated using the RADIUS server
-
instead of local server.
TACACS. The user's name and password are authenticated using the TACACS
-
server.
Deny. Authentication always fails.
-
Click the Add button.
10.
The login list is added to the switch.
To remove the selected authentication enable list from the configuration, click the Delete
11.
button.
Manage Device Security
557