View Chassis Backplane-Port Configuration - NETGEAR M7100 Series User Manual

View Chassis Backplane-Port Configuration


To view backplane-port configuration:
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
1.
example, 169.254.100.201.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
2.
the switch.
Launch a web browser.
3.
Enter the IP address of the switch in the web browser address field.
4.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
Enter the user name and password.
5.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
6.
The web management interface menu displays.
Select System > Chassis > Advanced > Backplane-port Configuration.
7.
Select either the Unit ID or All.
8.
Select the Unit ID to display information for the selected unit.
•
Select All to display information for all units.
•
The following table describes the nonconfigurable Backplane-port Configuration data that is
displayed.
Table 59. Backplane-Port Configuration
Field
Unit ID
Port
Link Status
Link Speed (Gbps)
M6100, M5300, and M7100 Series Managed Switches
Description
The unit ID of the specific blade.
The backplane-port on the given blade.
The link status (Up/Down) of the port.
The maximum speed of the backplane-port.
Chassis and Stacking
161