Warranty And Safety Instructions - Viola Systems Arctic IEC-104 User Manual

User's Manual

Warranty and Safety Instructions

Read these safety instructions carefully before using the products mentioned in this manual:
Warranty will be void if the product is used in any way in contradiction with the instructions given in
this manual or if the product has been tampered with.
The devices mentioned in this manual are to be used only according to the instructions described in
this manual. Faultless and safe operation of the devices can be guaranteed only if the transport,
storage, operation and handling of the devices is appropriate. This also applies to the maintenance of
the products.
To prevent damage both the product and any terminal devices must always be switched OFF before
connecting or disconnecting any cables. It should be ascertained that different devices used have the
same ground potential. Before connecting any power cables the output voltage of the power supply
should be checked.
This product is not fault-tolerant and is not designed, manufactured or intended for use or resale as
on-line control equipment or as part of such equipment in any hazardous environment requiring fail-
safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication
systems, air traffic control, direct life support machines, or weapons systems, in which the failure of
Viola Systems manufactured hardware or software could lead directly to death, personal injury, or
severe physical or environmental damage.
Arctic IEC-104 Gateway 5 Viola Systems Ltd.