Table of Contents
Advertisement
User's Manual
Application Menu
Application menu contains the serial device server application. With this application serial devices can
be connected to the Arctic Gateway and used over the TCP/IP network.
Serial GW
Serial gateway can be enabled from this menu. When enabled in "Server" operation mode, TCP/IP (or
UDP) connections can be made to the Arctic (Local Server Port). When Serial GW is in "Client"
operation mode, Arctic Gateway sends the received serial data via TCP/IP to host (Remote IP
Address or host) to remote host (Remote Port).
IEC-104 Serial device is connected to Arctic RS2 serial port. The RS2 serial port can be used either
as an RS-232 or an RS-485 type port (IEC-104). To enable serial gateway functionality on RS1 the
console (RS1) port, the console switch has to be set to "0".
For example, a device connected to an Arctic GW application (when in server operation mode) serial
port could be accessed with telnet utility as follows:
telnet <Arctic IP Address> 2404
Tools Menu
The Tools menu provides the access to web based tools used for troubleshooting with the Arctic. It is
possible to execute simple shell commands through the Web console. Also GPRS information can be
obtained from "Modem Info" menu.
Default settings
Arctic may be set to factory default settings from the Tools menu. This restores factory settings
excluding network settings.
Arctic IEC-104 Gateway
25
Viola Systems Ltd.
Advertisement
Table of Contents
