Viola Systems Arctic IEC-104 User Manual page 24

Web Server – Disables or enables the www server.
Web Configuration Access - Disables or enables web configuration access.
Note: If you disable the web access settings, web configurator stops functioning and you will have
to enable it via console if you should need to use it again later.
SSH
SSH server is available in Arctic for secure connections. Configuration file located at
/etc/sshd_config may be edited manually.
SSH Server – Enables or disables the SSH server.
Telnet
Telnet server may be used to make terminal connections to the Arctic device shell. A more
secure way of performing remote management is based on the SSH.
Telnet server- Enables or disables the telnet server.
DHCP
DHCP server listens to broadcast DHCP queries and assigns IP address for host from the
configured pool. If needed, Arctic can act as a DHCP server. This is suitable for small remote
networks that have for example few laptops connected to the Arctic via an Ethernet hub or a
switch.
DHCP Server – Enables or disables the DHCP server.
Note: Configuring the DHCP server in an erroneous way may cause your network to function badly
or may prevent functioning altogether. Consult your network administrator for necessary
information before setting up the service.
Arctic IEC-104 Gateway 24
User's Manual
Viola Systems Ltd.