Setting Of The Ip Address Using An Html Browser - Viola Systems Arctic IEC-104 User Manual

Setting of the IP Address Using an HTML Browser

This is the recommendable way to set up the network parameters. It is an easy-to-apply solution if the
computer used for configuration has been properly configured. Follow the procedure listed below:
1. Connect to the Arctic using your HTML browser. The default IP address of the Arctic is
"10.10.10.10" (netmask "255.0.0.0").
2. From the initial page click Start Configurator and enter login information in the following page.
Username is root and by default no password is set (just leave the field empty).
3. Navigate to Network page (1 in the picture) and from there to Ethernet subpage (left menu, 2).
4. Enter the IP address (and other network settings) of your choice and click Apply (3) and then
Commit (4) to store the settings.
5. Reboot the Arctic for the settings to take effect.
Note: Arctic default password is empty. Remember to set the password before connecting the Arctic
device to a public network.
Arctic IEC-104 Gateway 17
User's Manual
Viola Systems Ltd.