Table of Contents
Advertisement
Day/night switch
Set the level at which the camera's infrared filter automatically switches in and out at dawn and dusk
(Figure 14). The light level switch point is adjustable, but should be set only during dawn/dusk conditions.
Note:
This menu will only be present if the camera supports day/night switching.
Figure 14. Day/night switch
•
Select option 2 to use the KTD-405 keypad to manually activate the switch.
•
Select option 3 to switch based on a sensor in the camera.
•
Select option 4 to switch based on a sensor on the PTZ tilt arm.
If you select the PTZ tilt arm sensor, you'll have to indicate at which level you want the switch to happen
(Figure 15 on page 13).
Figure 15. Switch level
Chapter 1
13
Programming
Advertisement
Table of Contents
Troubleshooting
