Chapter 1
31
Programming
Current status
To review the current setup settings for your camera, select option 4 (Current status) from the Program select
menu and pan right. Settings cannot be entered or changed from the Setup status menus. CyberDome II
cameras with preset and area features have status menus that show programmed presets and programmed areas
by putting an X next to them in the menu. The typical Setup status menus are shown in Figure 43 and
Figure 44.
Note:
If the camera does not support an option it is not displayed on the status page.
Figure 43. Status menu 1
Figure 44. Status menu 2