Shadowtour - GE CyberDome II User Manual

Hide thumbs Also See for CyberDome II:
Table of Contents

Advertisement

5. For each step programmed, the following information must be entered:
The preset number (1 to 128).
The dwell time at each step (1 to 127 seconds). The default dwell time is 2 seconds.
The speed at which the camera moves between presets. There are three speed settings: SLW
(slow), MED (medium), and FST (fast). Press the iris + to cycle through the speed settings.
The zoom level (freeze (FZ) or zoomed out (ZO)).
The title (TTL) (on or off).
6. To finish programming a tour, press the iris - key. The PTZ tour programming menu displays.
7. Navigate to option two to play the tour, to verify, and press the iris + to exit back to the previous menu.

ShadowTour

CyberDome II cameras have ShadowTour capability. A ShadowTour is a tour that the camera "learns" by
recording up to five minutes of manual P, T, and Z operation. Use a keypad to manually direct your camera
through the desired PTZ movements, and the camera stores in memory the movements you performed. This
recorded tour can be replayed at any time.
To program a new ShadowTour, do the following:
1. Navigate to option 5 from the Program select menu (Figure 7 on page 8). The PTZ tour programming
menu displays (Figure 45 on page 33).
2. Pan right with the joystick to advance to the PTZ tour programming menu that displays ShadowTours
(Figure 46 on page 34).
3. Select the tour to be created.
4. Select 1 to select New tour.
5. Press iris + to start the timer.
6. Move the camera through the desired movements.
7. Press iris + to save ShadowTour, stop the timer, and exit back to the ShadowTour menu.
8. Press iris - to exit back to the PTZ tour programming menu.
9. Repeat steps 2 through 8 for more ShadowTour programming. Otherwise, press iris- until you exit
back to the Program select menu.
To review an existing ShadowTour, do the following:
1. Select option 5 from the Program select menu (Figure 7 on page 8). The first menu to display is the
PTZ tour programming menu (Figure 45 on page 33).
2. Press Fast forward, or pan right with the joystick to advance to the PTZ tour programming menu that
displays ShadowTours.
3. Select the tour to be reviewed.
4. Select 3 to play the tour.
5. The tour will play indefinitely until stopped by a key or joystick movement.
6. Press iris- to exit back to the PTZ tour programming menu.
Chapter 1
35
Programming

Advertisement

Table of Contents
loading

Table of Contents