GE CyberDome II User Manual page 20

12 CyberDome II
User Manual
Azimuth indicator
The azimuth indicator enables a direction indicator to be displayed on the monitor/screen (Figure 13).
Figure 13. Azimuth indicator
• To disable the azimuth indicator select option 1, the default setting.
• To enable the azimuth indicator to show the heading (N, NE, E, SE, S, SW, W, or NW), select option 2.
• To enable azimuth indicator to show the pan and tilt coordinates, select option 3.
To calibrate the indicator, do the following:
1. Select set north, and press iris +.
2. Move to the desired position for north and press the iris + button. Press the iris - button to cancel.
To set where on the screen/display the indicator displays, do the following:
1. Select display row, and press iris +.
2. Set the row between 01(the heading default) and 11 (the coordinate default) by using the joystick to
navigate to the desired number and press iris +.