Programming; Navigation; Main Menu - GE UVD-XP3DNR(-P) User Manual

Programming

This chapter describes how to navigate the programming menus to adjust the
camera settings.

Navigation

To access and navigate the menus, press and hold the center of the OSD control pad
(Figure 4 on page 7). Press Up or Down on the control pad to move between items,
and press Enter (center of the control pad) to select the item. Press Right or Left on
the control pad to select the different options available for the item.
You can return to the previous menu from any of the menus (except the Main menu)
by selecting the Previous page option.

Main menu

The Main menu (Figure 7) provides the following options:
• "Presets menu" en page 10.
• "Setup menu" en page 10.
• "Viewing menu" en page 14.
• "Exposure menu" en page 14.
• "White balance menu" en page 15.
• "Save/restore menu" en page 15.
• Exit menu (exits the menu system).
There is a menu map provided on the back page of the manual.
Figure 6: Main menu
UVD-XP3DNR(-P) Camera User Manual 9