Inserting The Battery - CipherLab 8500 Reference Manual

8500 Series Mobile Computer
Monitor voltage level (see section

1.1.1 INSERTING THE BATTERY

For shipping and storage purposes, save the mobile computer and the main battery in
separate packages. This will keep both batteries in good condition for future use.
Note: Any improper handling may reduce the battery life.
1) Hold the mobile computer still as shown below.
2) Slide the battery pack into the battery compartment at a proper angle (30°~45°) so
that the tabs on the bottom of the battery are hooked in the grooves of the
compartment. Make sure that the battery is snugly fit into the compartment.
3) Slide the battery latch to lock the battery in the compartment.
Note: For a new battery, make sure it is fully charged before use. Always prepare a
spare battery pack, especially when you are on the road.
Figure 6: Installing the Main Battery
10
Reference Manual
3.5 Power)