CipherLab 8500 Reference Manual page 83

Note: If you are programming in C or BASIC, be aware that these icons will appear on
the device screen after NetInit() or START TCPIP() is called. (WPA must be
enabled first!)
Once the connection of echo test is established, the details will be displayed as illustrated
below. Link Quality ("Q") will be the most important element while the others are for
your reference.
Q (Link Quality)
0 ~ 10 Very Poor
10 ~ 15 Poor
15 ~ 30 Good
50 ~ 80 Very
Good
T (Transmit Speed)
1 Mbps
2 Mbps
5.5 Mbps
11 Mbps
6 Mbps
9 Mbps
12 Mbps
18 Mbps
24 Mbps
36 Mbps
48 Mbps
54 Mbps
S (Signal Level)
0 ~ 10 Weak
30 ~ 60 Moderate
Over 60 Strong
Chapter 3 System Menu
N (Noise Level)
1 Weak
2 ~ 3 Moderate
4 ~ 5 Strong
73