Power On Options; Key Click; System Password; Font - CipherLab 8500 Reference Manual

3.2.4 POWER ON OPTIONS

Set the startup screen once the mobile computer is turned on:
When "[0] Program Resume" is selected, the mobile computer will start from the last
session of program before it is turned off.
When "[1] Program Restart" is selected, the mobile computer will start from the first
session of the program.

3.2.5 KEY CLICK

The system will produce an audible signal when any key on the keypad is pressed. The
current value is highlighted. Select a desired tone for the buzzer or mute it.

3.2.6 SYSTEM PASSWORD

Set a password to control user access to the System Menu. The password can be up to
eight alphanumeric characters.
Note: The password is case-sensitive. To disable a previous password, enter blank on
the "Input new password" and "Verify password" screens.

3.2.7 FONT

Font version information can be viewed here. It displays System Font if there is no
custom font file.
If a multi-language font file is downloaded, you will be able to select a font from the list.

3.2.8 SCREEN CALIBRATION

The cross mark will appear on the four corners of the screen for alignment. Use the tip of
the stylus to tap at the center of the cross mark firmly and accurately.
To start with contrast calibration, press [1]+[9] simultaneously. Refer to section
for screen & backlight settings.
Warning: DO NOT use any pointed or sharp object to move against the screen.

3.2.9 RESET TO DEFAULT

Reset system settings to the default values, except for the reader settings.
Chapter 3 System Menu
1.4 LCD
43