Getting Started; Inserting Battery - CipherLab 8000 Reference Manual

GETTING STARTED

INSERTING BATTERY

For shipping and storage purposes, save the mobile computer and the main battery in
separate packages. This will keep both batteries in good condition for future use.
Note: Any improper handling may reduce the battery life.
1) Hold the mobile computer still and press the release button to unlock the battery
cover.
2) Slide off the battery cover.
3) Remove the battery lid by the other hand.
4) Slide the battery pack into the battery compartment at a proper angle (30°~45°) so
that the metal contacts on the battery are met with the charging contacts inside the
compartment. Make sure that the battery is snugly fit into the compartment.
5) Slide the battery cover back onto the mobile computer until it clicks into place.
Note: For a new battery, make sure it is fully charged before use. Always prepare a
spare battery pack, especially when you are on the road.
Figure 2: Installing the Main Battery
Introduction
5