Load Program - CipherLab 8500 Reference Manual

4.2.2 LOAD PROGRAM

You can download one program file to the active memory sector, as well as one font file
to the memory address assigned by the system. After downloading, restart the mobile
computer to activate the new program.
New application program or program update
And/or one font file, i.e. multi-language font
If you are using a custom font file rather the system font and you want to download
another font file, it is necessary to delete the current font file from the program list
displayed by the Program Manager
allowed.
.SHX Program
Program File
Font File
If you have downloaded a BASIC Runtime program, the next time you access the
Program service through the System Menu, you will be able to select whether to
download a C program (.SHX) or BASIC program (.SYN).
Note: To download a BASIC program (*SYN), go to System Menu > 6. Load Program
> 2. Load Basic.
SETTINGS
Interface
Cradle-IR (Serial IR)
IrDA
Bluetooth
first. Otherwise, downloading new font file is not
Download one of the following C program files and/or one font file:
AG Runtime
CipherNet Runtime
BASIC Runtime*
User program
Refer to the Font Files folder on CD-ROM.
Proceed to configure baud rate settings on your computer and the
mobile computer.
Point to the target IrDA device.
Approach the target Bluetooth enabled device.
Chapter 4 Program Manager & Kernel
(U*.shx)
(85xx-5250.shx, 85xx-VT.shx)
(BC*.shx)
Load
85