3.11.4 GSM/GPRS TESTS
GSM SMS Test
This GSM Sending Test is used to verify connectivity for Short Message Service. Enter a receiver
telephone number on the mobile computer.
GSM Modem Echo
The mobile computer will try to connect to a GSM modem.
1. Run the Echo Test program on your computer. Associated settings include
- Select "Modem" for interface.
- Set Action Mode to "Passive".
2. Start the echo test on both ends.
3. Enter a receiver telephone number on the mobile computer.
4. The mobile computer will connect to the GSM modem that dials up your computer.
GPRS Client Mode
The mobile computer will try to connect to your GPRS service provider.
1. Run the Echo Test program on your computer. Associated settings include
- Select "TCP/IP – Server" for interface.
- Set Action Mode to "Passive".
2. Start the echo test on both ends.
3. Enter the server IP on the mobile computer.
4. The mobile computer will dials up to a GPRS AP, and finally connect to your computer (server)
through the GPRS AP.
Note: Run the utility "Echo Test" on your computer (TCP/IP – Server or Client) or
"TcpServer.exe" for GPRS Client Mode. Then, start this test on your mobile
computer.
Chapter 3
System Menu
77