Certificate Of Authenticity; Known Issues - HP StoreEasy 1000 Storage Administrator's Manual

The left panel provides links to information about the following items:
Controller
Select a storage controller to view its type, status, firmware version, and serial number.
Physical Drives
This section provides an overview of all disk drives attached to the controller. Drives are
identified and grouped as assigned, unassigned, and spare drives. Each physical drive is
listed as a separate entry in the Storage System submenu. Select any of the physical drives to
display more information about the drive.
NOTE:
remains offline and its LEDs will remain off.
Logical Drives
A list of logical drives associated with the controller appears in the left panel tree view. Select
one of the logical volume entries to display the status of the volume, fault tolerance (RAID
level), and capacity (volume size). A link to the logical volume storage pool is also displayed.
Tape Drives
This section provides information about tape drives, if they are included.
Storage Boxes
This section provides an overview of the disk drives that are listed individually in the Physical
Drives section.
System
This section displays status for various system components.
Version Control
This section provides information about the Version Control Agent.
Operating system
This section provides information about the operating system storage volumes.
Software
This section provides information about system firmware and software.

Certificate of Authenticity

The Certificate of Authenticity (COA) label is used to:
Replace the main board/motherboard.
Upgrade the factory-installed operating system using the Microsoft Upgrade program for
license validation.
Reinstall the operating system because of a failure that has permanently disabled it.
The COA label location varies by server model. On rack-mounted server models, the COA label
is located either on the front section of the right panel or on the right front corner of the top panel.
On tower models, the COA label is located toward the rear of the top panel of the server. On
blade models, the COA label is located on top of the server or storage blade.

Known issues

Table 4 (page 88)
mitigate them.
Spare drives are only used when a disk drive fails. Until a spare drive is used, it
identifies known issues with the storage system and provides workarounds to
Certificate of Authenticity 87