How To Upgrade 3656 Firmware; Upgrading 3656 Cpu Firmware - CipherLab 1564 User Manual

1564 Barcode Scanner

HOW TO UPGRADE 3656 FIRMWARE

UPGRADING 3656 CPU FIRMWARE

1) Connect the interface cable, RS-232 or USB, between 3656 and your computer. For
USB Virtual COM, you may need to install its driver first!
2) Connect the power supply cord from 3656 to a proper power outlet.
3) Refer to 3.1.1 Connect to 3656 for the target scanner to connect to 3656.
Read the "Set Connection" label first, and then the "Serial Number" label. Both labels
can be located at the back of 3656.
4) Read the following barcodes in sequence to configure the scanner to use RS-232 as
download interface.
Or, read the following barcodes in sequence to configure the scanner to use USB
Virtual COM as download interface.
5) Read the following barcodes in sequence for 3656 to enter the download mode. The
Communication LED on 3656 will be flashing red to indicate it is ready for
downloading.
246
User Guide
Enter Setup
Enter Setup
Activate 3656
RS-232
Update
Activate 3656
USB Virtual COM
Update
Enter Setup