1564 Barcode Scanner
4.21.7 APPLICATION ID MARK
You may want to add an application ID mark (1 character long) to the left (AIMark1) or
right (AIMark2) of an application ID (AI) for the purpose of labeling it when formatting
the GS1 data. The application ID mark is automatically added to the data when GS1
formatting is enabled.
1) Read the barcode above to add a mark to the left (AIMark1)/right (AIMark2) of an
application ID.
2) Read the
"Hexadecimal
'00' if you want to remove the AI mark.
3) Read the "Validate" barcode to complete this setting.
162
User Guide
System" barcode on page 264 for the desired character. Read
AIMark1
AIMark2
Enter Setup