CipherLab 1564 User Manual page 123

Use random PIN
No PIN required
Note: When using BT HID, some device driver may not support pre-defined PIN code for
authentication. In this case, make sure you have the scanner set to "No PIN or use
random PIN" before pairing. While pairing, the host PIN code will be displayed on
the computer screen. Have the scanner read the setup barcode "Enter PIN Code in
Decimal" or "Enter PIN Code in Hexadecimal" to input the matching PIN code.
Refer to Disable Authentication or Use Random
Secure Simple Pairing (SSP)
Secure Simple Pairing (SSP), introduced in Bluetooth
feature designed to ease the pairing process while keeping up the communication security level.
This function is disabled by default.
Chapter 3 Setting up a WPAN Connection
PIN.
®
Core Specification 2.1 + EDR, is a new
*Disable
Enable
Update
107