Scan Modes; Test Mode - CipherLab 1564 User Manual

1564 Barcode Scanner

1.6 SCAN MODES

Different scan modes are supported – select the scan mode that best suits the
requirements of a specific application. Refer to the comparison table below.
A barcode acceptable to 1564 can only contain data of 7 KB at most.
Scan Mode Start to Scan
Always

Test mode

Laser mode
Auto Off mode
Auto Power Off
mode
Aiming mode
Multi-Barcode
mode
Presentation
mode
Note: By default, the scan mode is set to Laser mode.
1.6.1 TEST MODE
The scanner is always scanning.
Capable of decoding the same barcode repeatedly without removing it, for testing
purpose.
38
User Guide
Press Hold
trigger trigger
once
Stop Scanning
Press Release
trigger trigger
twice
Test Mode
Enter Setup
Press Barcode
trigger being
once read
Timeout