CipherLab 1564 User Manual page 76

1564 Barcode Scanner User Guide
Digits Transmission
By default, the alphanumeric keypad is used for transmitting digits. Select "Numeric Keypad" if you
wish to use the keys on the numeric keypad.
Numeric Key
*Alphanumeric Key
Note: If you select "Numeric Keypad", the Num Lock status of the physical keyboard
should be "ON". This setting is not supported on PDAs.
Kanji Transmission
Kanji Transmission is supported by the scanner when either Bluetooth HID, Keyboard Wedge via
3656 or USB HID via 3656 is selected for the output interface. By Kanji Transmission, when the
host computer is running on Japanese Windows O.S., the scanner is able to transmit Japanese
characters including the Chinese characters used in modern Japanese writing system.
Kanji Transmission is disabled by default. Enable/disable scanner's Kanji Transmission by reading
the following barcodes:
Enable
*Disable
60
Enter Setup