Retest After Repair - Lincoln Electric PRO-CUT 60 SVM104-A Service Manual

RETEST AFTER REPAIR

Should a machine under test be
rejected for any reason requiring the
removal of any mechanical part that
could affect the machine's electrical
characteristics, or if any electrical
components
replaced, the machine must be
retested.
RECOMMENDED METERS FOR MACHINE OUTPUT TESTS
VOLTMETER:
TROUBLESHOOTING & REPAIR
are repaired
INPUT VOLTS / HERTZ
208 / 60
230 / 60
460 / 60
575 / 60
MAXIMUM ACCEPTABLE OUTPUT VOLTAGE -
AT MINIMUM OUTPUT SETTING
Output Control at Minimum
MINIMUM ACCEPTABLE OUTPUT VOLTAGE -
AT MAXIMUM OUTPUT SETTINGS
Output Control at Maximum
Analog type meter
or
INPUT IDLE AMPS
MAXIMUM IDLE AMPS
26 Amps @ 43VDC
60 Amps @ 90VDC
F-52
4.4
4.0
2.0
1.6
PRO-CUT 60