F-37
REMOVAL/REPLACEMENT
PROCEDURE
1. Disconnect input power to the
machine.
2. Remove the Left Case Side
assembly.
3. Perform
DISCHARGE PROCEDURE.
4. Remove the seven Molex plugs
from their headers and position
out of the way. See Figure F.1.
5. Remove
screws.
PRO-CUT 60
TROUBLESHOOTING & REPAIR
CONTROL BOARD REMOVAL
the
CAPACITOR
the
10
mounting
6. Remove the Control Board from
the machine by carefully lifting it
straight up until clear of all other
parts.
7. Insert the replacement Control
Board carefully
machine and install in reverse
order of removal.
re-connect the seven Molex
plugs back into their headers
securely.
into
the
Be sure to