The Demo Mode - Electrolux EDW 1100 Service Manual

8.4.1. The Demo mode

To this end, switch the dishwasher on with the On/Off button.
l
Call-up demo mode
Ä
In order to access the Demo-Mode, it might be necessary to press the RESET button numerous times
until the text "SELECT PROGRAM" appears in the text line of the display.
Ä The Demo mode is called-up by pressing the two buttons OK/Start and Reset for approx. 10 seconds at the same time.
Ä "DEMO OFF" appears in the display.
Ä The Demo mode can be activated by pressing the Option button.
Hereby, the two settings "DEMO ON" and "DEMO CONTINUOUS" can be selected.
Ä The preselection is activated and the Demo mode activated by pressing the Ok/Start button.
Ä The texts "SELECT PROGRAM" and "DEMO ACTIVE" alternately appear in the display.
l
Mode A: "DEMO ON"
Ä The "DEMO ON" mode enables the user to operate the dishwasher normally in that he sets the programs and options.
Ä If the program is started by pressing the OK/Start button and it runs, no actuators are triggered.
Ä
Obviously, the individual program parts are completed faster than normal so that there are
greater leaps in time until the end of the program is reached.
Ä This mode serves presentation purposes.
l
Mode B: "DEMO CONTINUOUS"
Ä
The "DEMO CONTINUOUS" mode functions analogue to the "DEMO ON" mode but the selected program runs
continuously until it is cancelled with the Reset button.
Ä This mode mainly serves the purpose of allowing the dishwasher to run in a continuous simulation operation in sales.
l
Deactivate demo mode
Ä To deactivate the Demo-Mode, the Reset button bust be pressed as long as " SELECT PROGRAM" is in the display.
Ä The press the Reset button for approx. 6 seconds.
Ä During this period, the texts "SELECT PROGRAM" and "DEMO ACTIVE" alternately appear in the display.
Ä The Demo mode is deactivated if the text "LANGUAGE ENGLISH" is shown in the text line.
In Juno dishwashers, the text "LANGUAGE GERMAN" is displayed.
The display is now reset to the delivery status