Electrolux EDW 1100 Service Manual page 46

8.4.7. Service menu / Brightness
1.
2.
OPTION
3.
OK / START
4.
OPTION
5.
OK / START
6.
RESET
oder automatisch nach 60sek.
w
The brightness value 10 is set ex-works.llt.
w
Setting values of 0 (dark display) to 10 (light display) possible.
Ä Scroll through to the brightness service option with the option button.
2.
Ä Service option is shown in the text line of the display.
Ä (Example "Brightness 10 ")
Ä The brightness selection is activated by pressing the Ok/Start button.
3.
Ä The currently set value appears in the text line of the display
Ä The text part "BRIGHTNESS" is illuminated, the brightness setting flashes.
Ä The brightness can be changed with each push of the Option button.
4.
Ä However, in the service menu this is only possible in one direc
Ä Sequence: ... - 10 - 0 - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 0 - ...
Ä The text part "BRIGHTNESS" is illuminated, the brightness setting flashes.
Ä The new brightness setting is taken over by pressing the Ok/Start button.
5.
Ä The new brilliance setting is shown in the text line of the display.
(Example "Brightness 8 ")
6. Leaving the function
After the button has been pushed for the last time, the service menu can be quitted as follows.
w
...by pressing the Reset button, the function is quitted and "SELECT
PROGRAM" appears in the text field of the display
w
or this occurs should no button be pressed within 60 seconds
w
or the dishwasher is deactived with the On/Off button.