12 "Demo" Mode - Electrolux DIVA 60 cm Service Manual

12 "DEMO" mode

To demonstrate the operation of the machine, a function has been provided which executes an
accelerated simulated washing cycle that includes all phases in the cycle and is realistically displayed on the
LCD. This operating mode is called DEMO. During the demonstration of the washing cycle, the machine does
not fill with water from the water system in the building (so demonstrations can be carried out in the dealer's
showroom); all phases in the cycle are simulated on the display. When the function is set to "DEMO ON", one
single simulated washing cycle is executed at a time. Another mode called "CONTINUOUS" can be selected to
execute continuously repeated simulated washing cycles automatically until the user exits the DEMO mode.
To activate the DEMO function:
1. Turn the appliance on by pressing button S0
If the last cycle run flashes on the display:
Press "Cancel" button to cancel the cycle
SET THE CYCLE appears on the display
2. Press buttons Cancel and Ok/Start at the same time
DEMO OFF appears on the display
DEMO appears steadily
OFF flashes
3. Press "Options" button Options
ON appears on the display (CONTINUOUS
appears when the button is pressed again)
4. Press "OK/START" button to confirm
The following messages alternate on the display:
SET THE CYCLE
DEMO ACTIVE
5. Choose:
The washing cycle:
On free-standing models, use buttons S1 to S6
On built-in models, use the programme selection
button
Choose any options desired and/or a delayed start
time
6. Press "OK/START" button to confirm
The chosen wash cycle begins
All phases of the cycle are run, as indicated on the
display
An accelerated version of the cycle is run
NB: In case of DEMO CONTINUOUS the cycle is repeated until the exit from DEMO mode!
7. In case of DEMO ON, at the end of the cycle
The buzzer sounds
The following messages alternate on the display:
END OF CYCLE
SWITCH OFF
8. Press "Cancel" button
The following messages alternate on the display:
SET THE CYCLE
DEMO ACTIVE
44