Electrolux EDW 1100 Service Manual page 44

8.4.5. Service menu / Pulse wash
1.
2.
OPTION
3.
OK / START
OK / START
4.
RESET
oder automatisch nach 60sek.
w
Pulse Wash is always set to active ex works.
w
If the pulse rinsing function is deactivated, the rotational speed of the
circulating pump is generally increased to "High Pulse Speed" .
w
The water consumption increases slightly.
w
A time extension is possible depending on the temperature.
Ä Scroll through to the pulse rinsing option with the option button.
2.
Ä Service option is shown in the text line of the display.
Ä (example "5 PULS WASH ON ")
Ä The text part "5 PULSE RINSING" is illuminated, the setting "ON" flashes.
Ä
3. The option can now be deactivated "OFF" or activated "ON" each time the
Ok/Start button is pressed.
Ä The text part "5 PULSE RINSING" is illuminated, the setting "ON" or "OFF" flashes.
4. Leaving the fuction
After the button has been pushed for the last time, the service menu can be quitted as follows.
w
...by pressing the Reset button, the function is quitted and "SELECT
PROGRAM" appears in the text field of the display
w
or this occurs should no button be pressed within 60 seconds
w
or the dishwasher is deactived with the On/Off button.