Electrolux EDW 1100 Service Manual page 48

8.4.9. Service menu / Water hardness
1.
2.
OPTION
3.
OK / START
4.
OPTION
5.
OK / START
6.
RESET
oder automatisch nach 60sek.
Ä Scroll through to the water hardness option with the option button.
2.
Ä Service option is shown in the text line of the display.
Ä (Example "WATER HARDNESS 4 ")
Ä The water hardness setting is activated by pressing the Ok/Start button.
3.
Ä The currently set value appears in the text line of the display
Ä The text part "WATER HARDNESS" is illuminated, the hardness flashes.
Ä The water hardness can now be changed with each push of the option button.
4.
Ä However, in the service menu this is only possible in one direc
Ä Sequence: ... - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 1 - 2 - 3 - 4 - 5 - ...
Ä The text part "WATER HARDNESS" is illuminated, the hardness setting flashes.
Ä The new water hardness setting is taken over by pressing the Ok/Start button.
5.
Ä The new water hardness setting is shown in the text line of the display.
(Example "WATER HARDNESS 3 ")
6. Leaving the function
After the button has been pushed for the last time, the service menu can be quitted as follows.
w
...by pressing the Reset button, the function is quitted and "SELECT
PROGRAM" appears in the text field of the display
w
or this occurs should no button be pressed within 60 seconds
w
or the dishwasher is deactived with the On/Off button.