Changing The Battery; Battery Jump - Schlage SCHLAGETOUCH User Manual

Keyless touchscreen locks
Table of Contents

Advertisement

Available languages

Available languages

Changing the Battery

»
Tip: Replace the batteries in your lock at the same time each year that you test
and replace the batteries in your smoke alarms. This will ensure continued reliable
operation. Use a high-quality alkaline 9 volt battery for replacement.
»
If your lock's low battery icon is lit, replace the battery as soon as possible.
1. Unscrew the battery
cover.

Battery Jump

The emergency battery jump start can be used to unlock your door if your battery is dead.
Do not disconnect the battery before you open your door.
WARNING: The lock will remain unlocked until you change the battery or manually
relock the door from the inside!
1. Connect a new high-
quality alkaline 9 volt
battery to the contacts
below the touchscreen
keypad.
»
Keep the battery
connected to the jump
start contacts as you
unlock your door.
4. Replace the dead battery with the new 9 volt battery.
See Changing the Battery above.
Lithium Batteries?
Lithium batteries may have a longer life, but when they begin to fail, they fail
quickly. We don't recommend them because they don't give you a lot of time
to change your batteries before the lock is completely dead.
2. Replace the battery.
2. Enter a User Code into the
keypad.
3. Replace the cover.
3. Rotate the lever to
open the door.
9 9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents