Schlage S-260 Product Installation

S-260 Digital Glass Door Lock
Product installation
Template for single door jamb preparation.
Right direction door
Dead bolt hole
13mm
Magnet hole 13mm
Right door handle shown.
Fixture
Plate
Hook
Installation template
Mark 3 hole locations including magnet
1
location. (Check handing)
After confirming the drill location matches
2
the location of the product, drill using a
13mm drill bit.
Insert battery and check if it operates by
3
pressing [Lock/Unlock] button.
Double door or frameless glass, use
4
optional strike (S-260H).
Step 1
How to install the fixture plate
Remove the double sided tape
1
protection film on the back of the
fixture plate.
Attach the fixture plate to the interior
2
of the glass door.
Step 2
When left/right direction is not converted.
Keypad will adjust automatically to
handing of door.
Right
direction
door
Left
direction
door
L
Manual
adjust
lever
R
Please use adjustment lever if the keypad
doesn't automatically adjust.
Step 3
Inside
Slide the main body fully against the two
protruding parts and the two fixed plates.
180
Left Hand Internal Inside