Related Manuals for Schlage Ease S2
Summary of Contents for Schlage Ease S2
- Page 2 Mounting screws (3) Two lengths provided Cover screws (4) Lever spigot Also includes (not shown): a) Strike plate & screws b) 4 x AA Alkaline batteries...
- Page 3 Ø54mm (2-1/8”) Slide the spindle hole position to suit 60mm (2-3/8”) or 70mm (2-3/4”) backset Ø60mm Ø60mm (2-3/8”) (2-3/8”) Ø70mm (2-3/4”) Ø70mm (2-3/4”)
- Page 4 3. Position the inside mounting plate to sit flush on the door, ensuring the cable and spindle go through the holes in the mounting 1. Install latch on the door, ensuring the pin plate. Secure both assemblies using 8/32 side of the latch is facing away from the screws provided.
- Page 5 5. Install interior assembly on inside mounting 7. Insert the cylinder into the lever. plate. Secure using 4 screws through the interior assembly onto the mounting plate. 8. Using a flat head screwdriver, ensure the 6. Install batteries and battery cover. turnplate is set vertical.
- Page 6 9. Insert the key into the cylinder and ensure 11. Install strike into door jamb. the key is horizontal. Check handing to ensure the lever is pointing towards the hinges. Push the lever onto the lever spigot until it clicks into place. Warnings Do not install batteries until the lock is completely installed on the door.
-
Page 7: Hardware Specifications
Definitions Fake PIN code: Reset button: Random numbers that are added before or After reset operation, the lock will be restored to after the user PIN. This prevents the user PIN factory default settings, all user credentials will from being exposed. be deleted. - Page 8 Enter Master PIN code # Enter Enter Master PIN code # New user PIN code # Enter Master PIN code # Enter Master PIN code # Enter Master PIN code # Notes: 1. Beeps sound only when sound is enabled. 2.
-
Page 9: Setting Pin Codes
Setting PIN codes Normal mode 1. Master PIN Code (4~10 digit): Default master PIN code is “12345678”, please 1. Enter the master modify it after installation. or user PIN code, If you forget your master PIN code, you followed by #, can reset your lock back to factory settings then rotate the (refer to page 11 for instructions). - Page 10 If unit is locked and you require emergency battery power, located on the bottom of the external unit is a micro USB port (refer to the exterior assembly diagram on page 3). Using a micro USB cable and charged power bank, you can power the lock to regain access as required.
- Page 11 Use a pointed object, press and hold the reset button for over 5 seconds until you hear a beep. For an enhanced experience and additional functionality, try using the Schlage Ease ™ with the Schlage Abode mobile application. Simply download the Schlage Abode app from the Apple App Store or the Google Play Store.